Payment & Shipping Terms:
|Net Width:||2050||Soldering Ability:||12+12|
|Working Speed:||60||Rated Power:||400-2000|
Pneumatic Reinforcing Mesh Welding Machine / Wire Mesh Welding / 2050MM Width
The working process
1. Feeding: Cross wire & Line wire are both pre-cut wires. Cross wires are feeded to the mould manually then the wire falling autoamticlly, while line wires are automatically feeded by the servo motor.
2. Welding: The main machine starts welding and adopts a synchronous control technology, both branch control welding time and welding time are controlled by a PLC digital programming system, and the pore size can be adjusted only by direct input on a touch screen control panel; welding power is pneumatic, and welding pressure can be easily and intuitively adjusted.
3. Welding finish: The servo motor controls an automatic mesh drawing process until the whole mesh is welded, and the automatic mesh connecting and discharging system is started; the welding of the next mesh is started.
|Wire diameter||5mm-12mm||Warp feeding||Pre-cut|
|Weft distance||Min. 50mm||Weft feeding||Pre-cut|
|Warp distance||100mm-300mm||Power supply||AC380V-440V|
|Warp quantity||26||Welding width||2500mm|
|Mesh length||12m||Welding speed||45 times/min|
1. air tank
2. air compressor
3. wire straighting and cutting machine
Contact Person: Mary